高精密成型耐磨零附件、刀模具、治具（超高耐磨/高耐冲击用）
材种:K10/HVF10/PV40/VVA201/VVA221/ASP60C/SKH57A/SKH55A/SKH4C(不锈锋钢）/SKH51A/SKD11/SKD2A/SUS316
1.被加工件最小厚度可至T= 0.20~0.06mm（最大厚度可至800mm以上）。
Machined work piece's minimum thickness is up to T= 0.20~0.06mm(and its maximum thickness is up to more than 800mm)
2.被加工件最小直径可至φD=φ0.006（最大直径可至φ600mm以上）。
Machined work pieces' minimum diameter is up to φD=φ0.006 ( and its maximum diameter is up to more thanφ 600mm.)
3.被加工件最长的长度可至L=6500mm（最短长度不限）。
Machined work pieces' maximum length is up to 6500mm (there is no limit for minimum length)
4.平面度、平行度、精度公差高可至0.005mm～0.002mm～0.001mm系列。
Flatness, parallelism, precision tolerance can be 0.005mm ~0.002mm～0.001mm high.
5.被加工件厚度公差高可至T±0.002mm~±0.001mm～±0.0005mm系列。
Machined work piece's thickness tolerance is up to T±0.002mm~±0.001mm～±0.0005mm.
6.表面粗糙度高可至0.2μm~0.1μm~0.05μm~0.01μm系列。
Surface roughness can be 0.2μm~0.1μm~0.05μm~0.01μm high .
★依图依样依要求可现生产极为复杂、精密和形状的成型制品。
|
Ру 
France 
Deutsch 
Portugal 
Spain 
Italy 
Arabia 
ID
VN 
EN
日本語
电话： +86-021-5032-3322 传真 ：+86-021-5045-5044